Question 1

An engineer must create a backup of the Cisco ACI fabric for disaster recovery purposes.The backup must be transferred over a secure and encrypted transport. The backup filemust contain all user and password related information. The engineer also wants toprocess and confirm the backup file validity by using a Python script. This requires the datastructure to have a format similar to a Python dictionary. Which configuration set must beused to meet these requirements?

A. Under the Create Remote location settings, select Protocol: FTP Under the Export policy, select - Format: XML - Modify Global AES Encryption Settings: Enabled
B. Under the Create Remote location settings, select Protocol: FTP Under the Export policy, select - Format: XML - Modify Global AES Encryption Settings: Disabled
C. Under the Create Remote location settings, select Protocol: SCP Under the Export policy, select - Format: JSON - Modify Global AES Encryption Settings: Disabled
D. Under the Create Remote location settings, select Protocol: SCP Under the Export policy, select - Format: JSON - Modify Global AES Encryption Settings: Enabled 

Show Answer

Question 2

An engineer must ensure that Cisco ACI flushes the appropriate endpoints when atopology change notification message is received in an MST domain. Which three stepsare required to accomplish this goal? (Choose three.)

A. Enable the BPDU interface controls under the spanning tree interface policy. 
B. Configure a new STP interface policy. 
C. Bind the spanning tree policy to the switch policy group. 
D. Associate the STP interface policy to the appropriate interface policy group. 
E. Create a new region policy under the spanning tree policy. 
F. Map VLAN range to MAT instance number. 

Show Answer

Question 3

The company’s Cisco ACI fabric hosts multiple customer tenants. To meet a service level agreement, the company is constantly monitoring the Cisco ACI environment. Syslog is one of the methods used for monitoring. Only events related to leaf and spine environmental information without specific customer data should be logged. To which ACI object must the configuration be applied to meet these requirements?

A. access policy 
B. infra tenant 
C. switch profile 
D. fabric policy 

Show Answer

Question 4

What must be configured to allow SNMP traffic on the APIC controller?

A. out-of-band management interface 
B. contract under tenant mgmt 
C. SNMP relay policy 
D. out-of-band bridge domain

Show Answer

Question 5

An engineer is in the process of discovering a new Cisco ACI fabric consisting of twospines and four leaf switches. The discovery of leaf 1 has just been completed. Which twonodes are expected to be discovered next? (Choose two.)

A. spine 1 
B. leaf 4 
C. spine 2 
D. leaf 3 
E. leaf 2 

Show Answer

Question 6

In the context of VMM, which protocol between ACI leaf and compute hosts ensures thatthe policies are pushed to the leaf switches for immediate and on demand resolutionimmediacy?

A. VXLAN 
B. LLDP 
C. ISIS 
D. STP 

Show Answer

Question 7

An ACI engineer is implementing a Layer 3 out inside the Cisco ACI fabric that must meetthese requirements:The data center core switch must be connected to one of the leaf switches with asingle 1G link.The routes must be exchanged using a link-state routing protocol that supportshierarchical network design.The data center core switch interface must be using 802.1Q tagging, and eachvlan will be configured with a dedicated IP address.Which set of steps accomplishes these goals?

A. Set up the ElGRP Protocol policy with the selected Autonomous System number. Set upthe Routed External Network object ana Node Profile, selecting ElGRP Create the Switchprofile, selecting Port-channel and the appropriate interfaces Create the default networkand associate it with the Routed Outside object
B. Set up the BGP Protocol policy with the Autonomous System number of 0. Configure an interface policy and an External Bridged Domain. Create an External Bridged Network using the configured VLAN pool. Build the Leaf profile, selecting Routed sub-interface and the appropriate VLAN.
C. Configure the OSPF Protocol policy with an area of 0. Create Routed Outside object and Node Profile, selecting OSPF as the routing protocol.Build the Interface profile, selecting Routed Sub-interface and the appropriate VLAN.Configure the External Network object with a network of 0.0.0.0/0.
D. Set up the ElGRP Protocol policy with the selected Autonomous System number. Createthe Routed Outside object and Node Profile selecting ElGRP Configure the Interface profileselecting Routed Interface and the appropriate interfaces. Create the External Networkobject with a network of 0.0.0.0/0. 

Show Answer

Question 8

New ESXi hosts are procured in a data center compute expansion project. An engineermust update theconfiguration on the Cisco APIC controllers to support the addition of the new servers tothe existing VMMdomain. Which action should be taken to support this change?

A. Create a range of internal VLANs in the associated VLAN pool. 
B. Set the encapsulation mode as VXLAN. 
C. Enable infrastructure VLAN in the associated AEP. 
D. Map the leaf interface selector to the AEP that is associated with the VMM domain. 

Show Answer

Question 9

A network engineer configures the Cisco ACI fabric to connect to vCenter with theserequirements:Port groups must be automatically created on the distributed virtual switch.Port groups must use the VLAN allocation in the range between 20-30.The deployment must optimize the CAM space on the leaf switches.Which set of actions meets these criteria?

A. Create a dynamic VLAN pool with the VLAN range of 20-30. Create a VMM domain and associate it with the VLAN pool. Create the EPG and associate the domain. Set the deployment immediacy to On Demand. 
B. Create a dynamic VLAN pool with the VLAN range of 20-30. Create a physical domain and associate it with the VLAN pool. Create the EPG and associate the domain. Set the deployment immediacy to On Demand
C. Create a static VLAN pool with the VLAN range of 20-30. Create a physical domain and associate it with the VLAN pool. Create the EPG and associate the domain. Set the deployment immediacy to Immediate.
D. Create a static VLAN pool with the VLAN range of 20-30. Create a VMM domain and associate it with the VLAN pool. Create the EPG and associate the domain. Set the deployment immediacy to Immediate. 

Show Answer

Question 10

A Cisco ACI bridge domain and VRF are configured with a default data-plane learningconfiguration. Which two endpoint attributes are programmed in the leaf switch whenreceiving traffic? (Choose two.)

A. Remote MAC. IP 
B. Remote Subnet 
C. Local IP, not MAC 
D. Local MAC, IP 
E. Local Subnet 
F. Remote IP

Show Answer